A refrigerator filter change is a small maintenance task, but the wrong cartridge or an incomplete installation can leave you with a reminder light that stays on, a filter that will not lock, or water that needs flushing. The steps for how to change water filter in frigidaire french door refrigerator depend on the cartridge system inside your specific model, so identify the filter before ordering or removing anything.
Frigidaire’s EPTWFU01 uses a push-and-twist connection, while the ULTRAWF uses a push-in connection. Those differences matter more than the refrigerator’s French door layout. This guide explains how to identify the cartridge, replace it, flush it where the instructions call for flushing, and reset the reminder. For broader cartridge-care context, see our guide to removing a used pitcher filter and our overview of inline water filter installation.
Product Options
Pros
- Effectively reduces common tap water impurities, providing cleaner water for drinking and cooking at camp
- Easy installation with no tools required - just push and click
- Compact design fits seamlessly in Frigidaire refrigerators, including many RV models
Cons
- Only compatible with Frigidaire refrigerators using the PureSource Ultra system, limiting portability
- Requires replacement every 6 months, adding ongoing cost for frequent campers
- Not a portable solution for backcountry use; best used at home or in an RV with the right fridge
When you're out camping, whether in an RV or at a family campsite, clean drinking water is non-negotiable. The Frigidaire PureSource Ultra ULTRAWF water filter is designed for Frigidaire refrigerators with the PureSource Ultra system, making it an excellent choice for RV campers who have this fridge model. It also works well for family campers who want to pre-filter water at home before filling their camping water containers. This filter is all about removing the stuff you don't want in your water - like lead, nitrates, pesticides, and mercury - so you can enjoy fresh-tasting water without worry.
Many campers may prefer using this filter for their RV refrigerator's water dispenser or icemaker. The carbon-based filter does a solid job of reducing chlorine taste and odor, which can be a big plus if you're used to tap water that smells like a swimming pool. According to product specifications, it's certified by NSF International against standards 42, 53, and 401, so you can trust that it's been tested for contaminant reduction. Some users find that the water tastes noticeably cleaner, especially when filling up their hydration bladders or bottles for a day hike.
Installation is straightforward - you push the release button to remove the old filter, slide the new one in until it clicks, then run water for three minutes to prime it. That's it. No tools, no plumber. Just be aware that the filter's 6-month reminder light doesn't reset automatically; you'll need to press and hold the Water Filter button on your dispenser panel for three seconds until the light changes from red to green. It's a minor step but easy to forget.
In terms of build quality, the ULTRAWF feels sturdy and well-made. It's compact - about 2.2 x 2.4 x 11.2 inches - and weighs just over half a pound. The water quality association has certified it for sustainability under WQA/ASPE/ANSI S 803, which is a nice bonus for eco-conscious campers. However, this filter is not a portable solution for backpacking or tent camping. It's designed specifically for Frigidaire refrigerators, so if you don't have one in your RV or home, it won't work.
One realistic limitation is that you'll need to replace this filter every six months. For frequent campers, that's a recurring cost. But considering the peace of mind from reduced contaminants and better-tasting water, many users find it worthwhile. The filter also doesn't improve water pressure or flow rate - it simply filters what's already coming through your fridge line.
If you're a weekend warrior with a Frigidaire fridge in your RV, or a family camper who likes to start with clean water at home, the Frigidaire PureSource Ultra ULTRAWF is a practical choice. It's not a backcountry filter, but it does exactly what it's supposed to do for your home or RV setup. For campers who prioritize water quality and convenience, this filter is a solid investment.
Changing a Frigidaire French Door Refrigerator Water Filter
Start by matching the existing cartridge and refrigerator model to the manufacturer’s instructions. Then use the connection style to remove and install the replacement, flush it if directed, and reset the filter indicator. A French door refrigerator does not automatically use one specific cartridge, so treat the refrigerator model and filter label as the deciding evidence.
Identify the cartridge before you begin
Check the label on the installed filter and consult the refrigerator’s Use and Care Manual for the replacement part it specifies. The two cartridges in the product list are not interchangeable just because both are Frigidaire filters. The EPTWFU01 is identified as a PureSource Ultra II cartridge, while ULTRAWF is identified as a PureSource Ultra cartridge.
Look at the filter compartment and the existing cartridge rather than relying on a broad description such as “French door refrigerator filter.” Frigidaire has used different filtration systems across refrigerator models, and the product information supplied here does not establish that either cartridge fits every French door model. If the filter label is missing or the part is difficult to read, find the refrigerator model number and use its manual or Frigidaire’s compatibility information to confirm the correct replacement.
Correct identification also clarifies the replacement motion. EPTWFU01 releases by turning a quarter turn counterclockwise and pulling it toward you. ULTRAWF releases by pushing it in to release it, then pulling it out. Trying to twist a push-in cartridge, or forcing a twist-lock cartridge straight out, can make removal confusing and may strain the filter compartment.
Remove and install the EPTWFU01 push-and-twist filter
For the EPTWFU01 procedure provided in the product information, turn the old cartridge 90 degrees counterclockwise and pull it toward you. Keep a cloth nearby in case a small amount of water escapes from the compartment. If the cartridge does not turn or withdraw with normal pressure, stop and check the manual for your refrigerator rather than levering it with a tool.
To install the replacement, orient its grip horizontally, slide it into the filter opening, and push it firmly into place. Turn it 90 degrees to the right until it clicks into its locked position. The grip orientation and click are useful cues, but they do not replace checking that the filter sits fully in the housing and that the refrigerator’s own instructions match this procedure.
A cartridge that feels misaligned should not be forced. Remove it and check that you have the EPTWFU01 style specified for the refrigerator, that the opening is clear, and that you are following the correct insertion direction. Avoid twisting beyond the described quarter turn. If the filter will not seat or lock after a careful retry, stop and check the manual or contact Frigidaire support.
Remove and install the ULTRAWF push-in filter
The ULTRAWF uses a different release mechanism. Push the old filter inward to release it, then pull it out and discard it. Do not apply the EPTWFU01 turn-and-pull sequence to this cartridge, since the supplied product instructions describe a push-to-release design.
Insert the new ULTRAWF into the filter system and push until it clicks into place. The click indicates that the filter has reached its locking position according to the product instructions. If the cartridge resists insertion, check its model designation and the refrigerator manual rather than forcing it or assuming the connection is the same as the old filter.
After installation, look for an obvious gap or a cartridge that sits crookedly. A filter that has not locked may not operate as intended and may leak. If you see water around the filter area, stop using the dispenser, check the installation guidance, and make sure the cartridge is the specified type and fully seated before dispensing again.
Flush the new cartridge according to its instructions
The ULTRAWF product information says to run water through the newly installed filter for three minutes to prime it, then discard that water. It notes that the initial water may contain harmless dissolved air and carbon particles. This flushing step helps clear those initial materials from the water delivered after installation.
The supplied EPTWFU01 information does not specify a flushing duration or volume. Do not assume the ULTRAWF instruction applies identically to the EPTWFU01 or invent a flush amount. Check the EPTWFU01 package directions and the refrigerator manual for the correct procedure for your model.
If water sputters or looks cloudy immediately after a change, air in the filter system can be a possible explanation, particularly for the ULTRAWF, whose instructions mention dissolved air during initial flushing. Follow the cartridge’s priming directions and discard the instructed initial water. If unusual appearance, taste, or leakage continues after the specified flushing, stop using the dispenser until you have checked the installation and the manufacturer’s troubleshooting guidance.
Reset the water filter reminder
Replacing a cartridge does not necessarily turn off the refrigerator’s reminder automatically. The supplied product information says most reminder lights are reset by pressing and holding the Water Filter button on the dispenser controls for three seconds. On models that use this procedure, the indicator changes from red to green when the status has reset.
Use the controls and reset instructions for your refrigerator model, since control layouts can differ. For the ULTRAWF, Frigidaire’s information specifically says that models with built-in six-month reminders should be reset according to the Use and Care Manual. The listed general button method is not a reason to ignore model-specific directions if the control panel does not respond.
If the light remains red, confirm that the new filter is installed and that you held the correct button for the full time specified. Then consult the manual for the refrigerator’s reset sequence. The reminder is a maintenance indicator; changing its color does not verify water quality, confirm that a cartridge is compatible, or resolve a filter that is leaking or incorrectly seated.
What the listed cartridges say about filtration
The EPTWFU01 product description identifies a carbon-based filter and says it is designed to improve chlorine taste. It also lists reduction of impurities such as lead, nitrates, and mercury. The ULTRAWF description likewise identifies carbon-based filtration, mentions chlorine taste and odor, and lists lead, nitrates, pesticides, and mercury among the impurities it is designed to reduce.
Those descriptions are product claims, not a complete substitute for the cartridge’s performance data sheet or the refrigerator manual. They do not provide reduction percentages, rated gallon capacity, or a specific replacement interval in the supplied details. The ULTRAWF is listed as tested and certified by NSF International against NSF/ANSI Standards 42, 53, and 401; do not transfer that certification statement to the EPTWFU01, whose supplied information does not list those standards.
Neither product description establishes that the cartridge removes every possible contaminant or makes unsafe water safe to drink. Refrigerator filters are point-of-use cartridges, not a replacement for assessing a private well or responding to a water advisory. If you have a specific concern, such as a contaminant not covered by the cartridge documentation, compare that concern with the exact performance data sheet and seek appropriate local water-quality guidance.
Diagnose a filter that will not seat or a dispenser that behaves differently
A cartridge that will not lock is often a reason to pause and recheck the part number, connection style, and insertion direction. Do not swap installation methods between the EPTWFU01 and ULTRAWF. If the cartridge matches the manual but still will not engage, look for an obstruction or visible damage without prying at the opening.
Water around the filter compartment after a change calls for prompt attention. Stop dispensing, check that the correct cartridge is installed and fully secured, and follow the refrigerator manual’s guidance for handling a leak. Do not assume that a reminder reset will fix a leak, and do not leave a suspected leak unattended.
A slow or interrupted flow immediately after replacement may relate to an incompletely seated cartridge, air in the system, or another refrigerator issue. Check the installation and follow the specified priming procedure before drawing conclusions. If the flow problem continues, consult the manual’s dispenser troubleshooting section rather than repeatedly removing and reinstalling the filter without a clear reason.
Changing a refrigerator cartridge is separate from diagnosing low pressure throughout the home. If taps and showers also have reduced flow, the cause may lie outside the refrigerator, and a refrigerator filter change alone may not address it. For whole-home treatment questions, product flow ratings and plumbing setup matter; the available information for these refrigerator cartridges does not provide whole-house flow specifications.
Plan the next replacement without guessing
Use the refrigerator’s filter reminder and Use and Care Manual to guide replacement timing. The product details supplied here do not establish a universal service life for either cartridge, so avoid assuming that every household should replace its filter on the same schedule. Water use, the model’s instructions, and the specific cartridge documentation are better guides than a generic interval.
Keep the replacement label or packaging until the filter is installed and working. It gives you a simple way to verify the model designation later and helps prevent confusion between twist-lock and push-in styles. If you order a cartridge before the existing one is removed, compare the new part number with the refrigerator manual rather than relying on appearance alone.
Filter reminders are useful, but they do not make cartridge compatibility automatic. A reminder may track an interval without identifying the exact replacement part needed, and resetting it only updates the refrigerator’s status display. Treat identification, correct installation, flushing where directed, and reminder reset as separate parts of the job.
Make the final checks before using the dispenser
After the cartridge is installed, confirm that it appears locked, follow its specified flushing directions, and inspect the compartment for water. Test the reminder reset using the refrigerator’s instructions. These checks address the main installation issues without assuming that every Frigidaire control panel or filter housing works the same way.
For an EPTWFU01, the key cues in the supplied directions are a horizontal grip during insertion and a 90-degree turn to the right until it clicks. For a ULTRAWF, they are a push-to-release removal and a push-in installation until it clicks, followed by the stated three-minute flush and discarding that water. Keeping those distinct procedures straight is the simplest way to avoid forcing the wrong connection.
If the model, cartridge, or reset sequence remains uncertain, check the refrigerator’s manual or contact Frigidaire before proceeding. Once the correct cartridge is seated, any required flushing is complete, and the area stays dry, the replacement task is finished. If water continues to leak or flow remains abnormal, treat that as a separate problem and follow model-specific troubleshooting guidance.


Write Your Review
No reviews yet. Be the first to share your experience!