Cleaner water starts with a sensible installation plan
Sharp chlorine taste, grit collecting in faucet aerators, and water that leaves scale behind can make everyday use frustrating. A whole-house setup can address some of those concerns at the point water enters your home, but filter placement matters, especially if a softener is already part of the plumbing. This guide to Install Whole House Water Filter Before Or After Water Softener explains the practical order-of-installation question and what to check before buying.
The Ziwshom Whole House Water Filter System is listed as a three-stage unit for city or well water, with PP, GAC/KDF, and softener cartridges. Its product details describe reduction of sediment, chlorine, and odors, but don’t provide micron ratings, flow-rate figures, or contaminant-reduction percentages. It also does not lower TDS, so it isn’t a substitute for reverse osmosis where dissolved-solids reduction is the goal. For more context on home filtration options, see this guide to non-RO water purifiers for home use.
For many conventional plumbing layouts, a sediment filter is installed upstream of a softener to catch grit before it reaches the resin bed. A carbon stage is often placed after the softener if chlorine removal is needed, since chlorine can affect some softener resins. But this product combines stages in one housing, and its listing doesn’t specify a separate installation sequence relative to an existing softener. Check the system manual and softener requirements, confirm the 3/4-inch connection fits, and ask a qualified plumber if your layout or water chemistry is uncertain. Product specifications are a useful starting point, not proof of performance for every supply.
Top Products
FAQs
Should a whole-house filter go before or after a water softener?
Usually, a sediment pre-filter goes before the softener, while carbon filtration may go after it. The best order depends on the filter media, softener instructions, and incoming water quality. Confirm the plumbing plan before installation.
Can this Ziwshom system be installed before an existing softener?
The listing doesn’t state a required position relative to a separate softener. It describes a combined three-stage system with PP, GAC/KDF, and softener cartridges, so consult its manual and your softener manufacturer before connecting both units.
Does this whole-house filter reduce TDS?
No, the product information explicitly says it does not lower TDS. Its stated purpose includes sediment, chlorine, and odor reduction while retaining natural minerals. Consider a reverse osmosis system if dissolved-solids reduction is needed, and compare the requirements in this inline water filter installation guide.
Is it suitable for both well water and city water?
Yes, the product listing says it is designed for both municipal and well supplies. Well water varies, though, and this system’s details don’t specify reduction rates for iron, lead, or other individual contaminants. Test your water and match treatment to the results.
How often do the replacement cartridges need changing?
The package includes three sets of cartridges, and the listing estimates 1.5 to 2 years of use. Actual replacement timing depends on water quality and household demand, so follow the manual and watch for changes in taste, odor, or flow.
Will this system preserve household water pressure?
No specific flow rate or pressure-drop data is provided, so pressure performance can’t be confirmed from the listing. The manufacturer warns that leaving the cartridge’s protective plastic wrap on can reduce water pressure; remove it before installation as directed.


Write Your Review
No reviews yet. Be the first to share your experience!